WP-1 Welding positioner. This positioner is our most popular, with a 13 inch steel table, capable of approximately 150 pounds centered in the horizontal. This unit has a 2" center hole, cast iron foot pedal, double sealed twin ball bearings, enclosed gearing, and our unique Constant Current Contact, which is spring loaded for long life. Pin lock tilt, 0, 45 or 90 degrees positions. Motor is available in 0-4 RPM or 0-8 RPM (additional cost). Motor is a 90 volt DC PM gearmotor and control uses standard 115 volt AC power, insulated and isolated for H.F TIG welding.
This positioner is different in many good ways, but here are three HUGE differences.
1. Tubular construction, this insures the machined secondary gearing is aligned for long service.
2. Total 360 degree enclosure of the precision secondary gearing keeps grinding dust, weld spatter and fingers out of the pinch points.
3. Twin, not one but TWO precision SEALED ball bearings, that distribute the load and still deliver smooth rotation.
MADE IN THE USA
WP-1 Welding Positioner Hollow Spindle, No Chuck:
SPECIFICATIONS:
Required power..................115 VOLT AC POWER
Weight capacity.................150 # balanced/centered vertical
100 # balanced at 45 degrees
50 # balanced at 90 degrees, 2” from C/L
Table...........................13” diameter with 3/8" slots, 5/16" thick, steel
Table tilt......................0, 45 and 90 degrees pin lock system
Motor...........................90 volt PM DC motor 1/12 HP
Control.........................SCR High Frequency tolerant control
Power on light, internal fused
Forward/Reverse toggle on Control
Speed ranges offered............Model #WP-14, 0-4 RPM 102 lbs. inch torque
Model #WP-18, 0-8 RPM 102 lbs. inch torque
Ground current..................200 Amps DC direct table contact
Shipping weight.................86 lbs. allowable for UPS
STANDARD ITEMS INCLUDED IN PURCHASE PRICE | :
*HOLLOW SPINDLE 2" HOLE
*H.D. CAST IRON FOOT PEDAL
*MOTOR FORWARD/REVERSE SWITCH
*HEAVY DUTY TUBULAR CONSTRUCTION
*DOUBLE SEALED MAIN BALL BEARINGS
*OVERSIZE 13" SLOTTED STEEL TOP
OPTIONS AND UPGRADES (available for additional cost):
*ARGON PURGE GAS ADAPTER
*0-8 RPM MOTOR
*GUARDED FOOT PEDAL
*ALUMINUM BASE EXTENSIONS
Building of quality welding equipment since 1987
